3.2.1.1 Setting The Tape Library Target Id For Each Adapter - Fujitsu ETERNUS LT160 Setup Manual

Setting the Fibre Channel Interface

3.2.1.1 Setting the tape library Target ID for each adapter

1) Click the [Target ID] button.
2) Select the adapter number button for the connected adapter.
(a) Setting the topology, addressing mode, and Loop ID for Fibre Channel
connection
3) Select the topology.
3-8
SETUP menu
-Host I/F
-Target ID
+Adapter#0
+Adapter#1
For fabric connection, click the [Fabric] button.
SETUP menu
-Host I/F
-Target ID
-Adapter#1
+Fabric
For direct connection, click the [FC-AL] button.
SETUP menu
-Host I/F
-Target ID
-Adapter#2
+FC-AL
C144-E073-01EN