Table of Contents
Advertisement
4) If direct connection is selected, specify the addressing mode.
Note:
-
C144-E073-01EN
Note: If fabric connection is selected, the addressing mode is automatically set.
To directly specify the Loop ID, click the [Hard Address] button.
SETUP menu
-Host I/F
-Target ID
-Adapter#2
-FC-AL
+Hard Address
To automatically set the Loop ID, click the [Soft Address] button.
SETUP menu
-Host I/F
-Target ID
-Adapter#2
-FC-AL
+Soft Address
Addressing mode: Hard Address and Soft Address
An addressing mode is used in Fibre Channel connection mode.
Hard Address and Soft Address can be selected as the addressing mode.
If Hard Address is selected, the user can specify the Loop ID (not ALPA).
If Soft Address is selected, the Loop ID is automatically set.
3.2 Settings for Fibre Channel Connection
3-9
Advertisement
Table of Contents
