Table of Contents
Advertisement
4) Use the zoneCreate command to define the aliases for a zone so that the
5) Use the cfgCreate command to define a zone configuration (in which multiple zones
6) Use the cfgEnable command to enable the zone configuration.
7) Using the cfgSave command, write the zone configuration to flush switch memory.
C144-E073-01EN
corresponding ports can be incorporated into the zone.
zoneCreate "zone-name", "zone-alias-name; ..."
The zone name must be specified only with alphanumeric characters (A to Z, a to z, 0
to 9) and the underscore (_). The zone name is case-sensitive. The zone alias must
begin with a letter. Specify the zone name followed by the zone alias names of the
ports to be included in the zone. Delimit the zone alias with a semicolon (;).
Example of setting
zoneCreate
"LT160_ZONE1"
zoneCreate
"LT160_ZONE2"
are grouped).
cfgCreate "zone-configuration-name", "zone-name; ..."
The zone configuration name must be specified only with alphanumeric characters
(A to Z, a to z, 0 to 9) and the underscore (_). The zone configuration name is case-
sensitive. The zone configuration name must begin with a letter. Specify the zone
configuration name followed by the relevant zone names. Separate the zone names
with a semicolon.
Example of setting
cfgCreate "LT160_ZONE", "LT160_ZONE1; LT160_ZONE2"
cfgEnable "zone-configuration-name"
Example of setting
cfgEnable
"LT160_ZONE"
cfgSave "zone-configuration-name"
Example of setting
cfgSave
"LT160_ZONE"
3.4 Zoning Procedure
"HOST_A0; LT160_L0 ; LT160_D0"
"HOST_B0; LT160_D1"
3-23
Advertisement
Table of Contents
