Setting The Media Mount Timeout Value - Fujitsu ETERNUS LT160 Setup Manual

2) Set a robot type and drive type as follows:
5.2.4

Setting the media mount timeout value

When the tape library is used, specify at least 20 minutes for a value for the media mount
timeout. Specify the value in the NetBackup System Configuration window in the
Configure menu on the NetBackup Administration window.
The following explains how to set the media mount timeout value:
1) From the NetBackup Administration window, select Start, and then select Configure
2) Select the master server. Click the right mouse button, and select Properties
3) Click the Global NetBackup Attributes tab, and check the Enforce Media Mount
C144-E073-01EN
• Robot type: TLD
•
Drive type: hcart
NetBackup menu.
(Read/Write).
Timeout after. Then, specify 20 minutes or longer for the value.
5.2 Setting VERITAS NetBackup (Windows NT 4.0/
Windows 2000)
5-7