Table of Contents
Advertisement
7) Display the properties for "Unknown Medium Changer Device."
8) This finishes the connection check.
C144-E073-01EN
If a switch is connected, Target IDs are displayed in ascending order by port number
(0, 1, 2 ...).
If the information above cannot be checked, make sure again that the HBA has been
installed correctly. If the HBA has been installed correctly, no device power;
connection errors; or topology, addressing mode, or Loop-ID setting errors are
possible. Check the settings, reboot the server, and then check the settings again.
4.2 Setting Windows NT 4.0/Windows 2000
4-15
Advertisement
Table of Contents
