Figure 2.13 Example Setting Of The Key Management Function For Each Partition - Fujitsu ETERNUS LT140 User Manual

Chapter 2 Setup and Operation Procedures
2.1 Basic Setup
2.1.3.2 Setting the Key Management Function for Each Logical Library (Partition)
This setting enables or disables the key management function for the existing partitions. Refer to
Basic Setup of the Key Management Function" (page 31)
abling the key management function.
Procedure
1
Move to the [Configuration > Encryption > LT Encryption] screen.
2
Select whether to enable or disable the key management function for each partition.
3
Click [Submit].

Figure 2.13 Example setting of the key management function for each partition

• The settings related to the key management function conform to the basic setup when a partition
is edited or created. Refer to
perform basic setup.
• When the key management function is disabled, data encryption depends on the backup software
setting.
FUJITSU Storage ETERNUS LT140 Tape Library Key Management Function Option User's Guide
to perform basic setup other than enabling or dis-
"2.1.3.1 Basic Setup of the Key Management Function" (page 31)
34
Copyright 2019 FUJITSU LIMITED
"2.1.3.1
to
End of procedure
P3AG-3762-02ENZ0