Setting The Media Mount Timeout Value - Fujitsu ETERNUS LT160 Setup Manual

5.1.4

Setting the media mount timeout value

When the tape library is used, specify at least 20 minutes for a value for the media mount
timeout. Specify the value in the NetBackup System Configuration window in the
Configure menu on the NetBackup Administration - Java window.
The following explains how to set the media mount timeout value:
1) Open the NetBackup System Configuration window from the Configure menu on the
2) Specify 20 minutes or longer for the media mount timeout value.
C144-E073-01EN
NetBackup Administration - Java window.
5.1 Setting VERITAS NetBackup (Solaris)
5-3