Overview
1.2
Location of Information
The procedure for setting up the tape library and the system depends on the combination
of server OS to which the tape library is connected and the Fibre Channel connection
method.
The following summarizes the setting procedures for specific combinations and the
locations in this manual where the corresponding settings are detailed.
•
Step
•
Step
•
Step
1-2
Server OS is Solaris and Fibre Channel connection mode is direct
The host bus adapter (HBA) is GP7B8FC1 (including GP7B8FC1-F).
Operation
1
Setting up the tape library
2
Setting the Fibre Channel interface
3
Setting the operating system
4
Setting backup software
5
Tuning backup performance
Server OS is Solaris and Fibre Channel connection mode is switch
The counter part host bus adapter (HBA) is GP7B8FC1 (including GP7B8FC1-F).
Operation
1
Setting up the tape library
2
Setting the Fibre Channel interface
3
Zoning
4
Setting the operating system
5
Setting backup software
6
Tuning backup performance
Server OS is Windows NT 4.0 or Windows 2000 and Fibre Channel connection
mode is direct
Operation
1
Setting up the tape library
2
Setting the Fibre Channel interface
3
Setting the operating system
4
Setting backup software
5
Tuning backup performance
See
Chapter 2
Sections
3.1
and
Section
4.1
Sections
5.1
and
Sections
6.1
and
See
Chapter 2
Sections
3.1
and
Section
3.3
Section
4.1
Sections
5.1
and
Sections
6.1
and
See
Windows NT 4.0
Windows 2000
Chapter 2
Sections
3.1
and
Section
4.2.1
Section
Section
5.2
Section
6.2
C144-E073-01EN
3.2
5.3
6.3
3.2
5.3
6.3
3.2
4.2.2