Instrument Panel Control Switches - HAKO PowerBoss Nautilus User Manual

PowerBoss
®
The Power of Clean
INSTRUMENT PANEL CONTROL
SWITCHES
The main scrubbing controls are located on the main
instrument panel for easy access and operator identifi cation.
See additional information on the Instrument Panel Control
Switches, starting on page 26.
GREEN "ONE TOUCH" SWITCH
A green "One-Touch" switch operates the entire scrubbing
function.
SQUEEGEE SWITCH
This switch operates the Squeegee and Vac Fan.
SCRUB BRUSH SWITCH
This switch operates the Scrub Brushes.
SIDE SCRUB BRUSH SWITCH - OPTION
This switch operates the Side Scrub Brush.
SCRUB BRUSH FORCE SWITCH
This switch controls the Scrub Brush Force and has three
settings: Low, Medium, and High.
SOLUTION FLOW SWITCH
This switch controls the Solution Flow and has three
settings: Off , Normal, and High.
Page 24
CHEMICAL METERING SWITCH - OPTION
This switch operates the Chemical Metering.
CHEMICAL METERING FLOW SWITCH - OPTION
This switch controls the Chemical Metering Flow and has
three settings: Low, Medium, and High.
VAC AND SPRAY WAND SWITCH - OPTION
This switch operates the Vac and Spray Wand.
SCRUBBING CONTROL DETAILS/FUNCTIONS
Below are the details and functions of the main scrubbing
control switch indicators. These controls/switches are
located to the left of the steering column for easy access and
operator identifi cation.
Nautilus Rider Scrubber/Sweeper #988749UM Rev. K 04/21
© 2014-2015 Minuteman International, Inc.