Options; Chemical Metering - HAKO PowerBoss Nautilus User Manual

PowerBoss
®
The Power of Clean

OPTIONS

CHEMICAL METERING

The chemical metering option is used to meter the optimum
amount of detergent onto the fl oor while scrubbing.
1. Place a full container of detergent (appropriate for the
application) into the detergent container rack located on
the top of the solution tank. (See Fig. 1)
Note: Use only recommended cleaning detergents. Machine
damage due to improper detergent usage will void the
machine warranty.
2. Remove the detergent container cap and replace it with
the suction hose cap.
3. Set the chemical metering fl ow rate. (See Fig. 2)
There are chemical fl ow rates available.
For normal scrubbing use the lowest chemical fl ow rate.
For heavier scrubbing use the medium or high chemical
fl ow rate.
4. Turn on the chemical metering switch. (See Fig. 2)
5. When scrubbing, the correct amount of detergent will
automatically be added to the solution delivery system.
Note: During the fi rst use after a new container of detergent
is installed it may take some additional time for the detergent
to reach the fl oor.
Page 44
DETERGENT
CONTAINIER
Fig. 1: Chemical Metering Option
CHEMICAL
METERING
SWITCH
Fig. 2: Chemical Metering Controls
Nautilus Rider Scrubber/Sweeper #988749UM Rev. K 04/21
© 2014-2015 Minuteman International, Inc.
SUCTION
HOSE CAP
DETERGENT
CONTAINER
RACK
CHEMICAL
METERING
FLOW
SWITCH