Filling The Solution Tank - HAKO PowerBoss Nautilus User Manual

FILLING THE SOLUTION TANK

Open the top cover of the solution tank. Begin fi lling the
solution tank with clean water not to exceed 130°F (55.4°C).
When the tank is approximately half full add the appropriate
amount of detergent (Do not add detergent in solution tank
if you are using the optional chemical metering system
for applying detergent). Continue to fi ll the solution tank
with water. The tank is full when the water level reaches
the bottom of the metal level indicator (located inside the
solution tank).
If the machine is equipped with an optional chemical
metering system do not add detergent in the solution tank.
Instead, place a container of cleaning solution into the
chemical metering box and install the pump suction hose.
Note: Use only recommended cleaning detergents.
Machine damage due to improper detergent usage will void
the machine warranty.
Nautilus Rider Scrubber/Sweeper #988749UM Rev. K 04/21
© 2014-2015 Minuteman International, Inc.
Fig. 1
PowerBoss
®
The Power of Clean
SOLUTION TANK
TOP COVER
SOLUTION
TANK
Page 29