Table of Contents
Advertisement
DIRECTIONAL CONTROL PEDAL
The directional control pedal controls the speed and direction
of the machine. It is also used for slowing the machine or
stopping.
•
To propel the machine forward, apply pressure to the
front (top part) of the pedal, increasing pressure to
increase speed.
•
To propel the machine backward, apply pressure to
the rear (lower part) of the pedal.
•
To slow or stop the machine, move the foot pedal into
neutral (release pressure on the pedal).
•
For emergency stops, move the foot pedal past
neutral and into the opposite position.
BRAKE / PARKING BRAKE
The mechanical drum brakes on the two rear wheels are
operated by pressing on the brake pedal. To engage the
parking brake push on the brake pedal then depress the
upper brake lock to set the parking brake. To release the
parking brake depress the brake pedal.
Nautilus Rider Scrubber/Sweeper #988749UM Rev. K 04/21
© 2014-2015 Minuteman International, Inc.
TILT STEERING LEVER
The steering wheel can be adjusted to provide the most
comfortable position for the operator. To adjust the steering
wheel loosen lever knob on the left side of the steering
column, position the steering wheel and tighten the lever
knob.
SEAT ADJUSTMENT
The drivers seat is adjustable to provide the most
comfortable position for the operator. The adjustment lever
is at the bottom front of the seat. While sitting in the seat,
push the lever to the right and pull forward or push back on
the seat. Release the lever when the seat is in the proper
location.
PowerBoss
®
The Power of Clean
Page 23
Hide quick links:
Advertisement
Table of Contents
