Normal Scrubbing - HAKO PowerBoss Nautilus User Manual

NORMAL SCRUBBING

This machine is equipped with one button
scrubbing. It is not necessary to press all of the
scrub function switches each time you begin
scrubbing.
1. On LPG powered machines; Open the liquid service
valve (turn valve counter-clockwise) on the LPG tank
(See Fig. 1).
2. Start the engine.
3. Ensure that the squeegee and brush switches (to the
right of the green one-touch switch) are in the "on"
position. Set the brush pressure switch to the lowest
setting required for the scrubbing application. Set the
solution control knob to the low fl ow position. (See Fig.
2)
If the machine is equipped with chemical metering
ensure that the chemical metering switch is in the "on"
position.
Nautilus Rider Scrubber/Sweeper #988749UM Rev. K 04/21
© 2014-2015 Minuteman International, Inc.
Fig. 1: LPG Tank - Location of Service Valve
ONE-
TOUCH
SWITCH
SQUEEGEE
SCRUB
SWITCH
BRUSH
"ON"
SWITCH
"ON"
Fig. 2: Control Settings, before "One-Touch" selection
PowerBoss
The Power of Clean
LPG TANK
SERVICE
VALVE
LOWEST LOWEST
SETTING SETTING
SCRUB
SOLUTION
BRUSH
FLOW
FORCE
CHEMICAL
METERING
SWITCH "ON"
Page 31
®