Table of Contents
Advertisement
EN
6.1 CONTROL PANEL
(Fig. 8)
1) LEDs status of battery charge
The button (3) is illuminated when
pressed, indicating the charging status of
the battery.
-
When the LED (1c) is illuminated, it in-
dicates that the battery charge status
is at maximum.
-
When the LED (1b) is illuminated, it in-
dicates that the battery charge status
is at about half.
-
When the LED (1a) is illuminated (red
LED), it indicates that the
charge status is at minimum.
With the battery discharged [red LED (1a)
illuminated], the machine turns off or will
not start and the LED "R" of the battery
charger flashes for a few seconds; the
battery needs recharging.
2) Aspirator button
On pressing the button (2) it illuminates
and the functioning of the aspirator starts.
The functioning of the aspirator is ena-
bled by pressing the button (3).
3) Brush rotation button
On pressing the button (3) it illuminates
and tension is fed to the circuits and rota-
tion of the brush.is enabled.
The starting of rotation of the brush is
controlled by pressing levers (5).
4) Water dispensing button
On pressing the button (4) it illuminates
and enables the dispensing of water for
washing pavement.
The dispensing of water is controlled both
by the switch (3) and by pressing the le-
vers (5).
5) Brush rotation and/or water dispens-
ing lever
Pressing the levers (5) and holding them
pressed, starts the rotation of the brush
and, if enabled, the dispensing of water.
battery
5
EN-16
1c
1b
1a
2
1
R
3
5
4
Fig. 8
Advertisement
Table of Contents
