Pressure Wash Option - HAKO PowerBoss Nautilus User Manual

PowerBoss
®
The Power of Clean

PRESSURE WASH OPTION

1. Park the machine close to the area to be cleaned.
2. Lower the squeegee and shut off the engine.
3. Set the parking brake.
4. Remove the hose from hose box located behind the
operator seat.
5. Open the front cover of the machine.
6. Attach the wand hose to the quick disconnect fi tting on
the upper end of the wand and to the quick disconnect
fi tting located on the backside of the console.
7. Turn the pressure wash switch to the "on" position.
8. Start the engine.
9. Turn the green one touch switch to the "on" position.
10. Turn the scrub brush switch to the "on" position.
11. Use the pressure wash wand to clean desired area.
Page 48
Nautilus Rider Scrubber/Sweeper #988749UM Rev. K 04/21
© 2014-2015 Minuteman International, Inc.