Draining The Solution Tank - HAKO PowerBoss Nautilus User Manual

PowerBoss
®
The Power of Clean

DRAINING THE SOLUTION TANK

1. Drive the machine to an appropriate dump site. Shut off
the engine and set the parking brake.
2. Open the solution tank top cover.
3. Grab the end of the solution tank drain and lower slowly
to the fl oor near fl oor drain. (See Fig. 1)
4. Loosen and remove the cap. (See Fig. 1)
Note: Depending on the level of liquid in the solution tank
the liquid may exit under pressure.
5. After tank has fully drained reinstall the cap.
6. Reinstall the drain hose onto the back of the recovery
tank.
7. Close the solution tank top cover.
Page 40
DRAIN
CAP
Fig. 1: Draining the Solution Tank
Nautilus Rider Scrubber/Sweeper #988749UM Rev. K 04/21
© 2014-2015 Minuteman International, Inc.
SOLUTION
TANK
DRAIN