Hopper Vacuum Seal; Cover Seals - HAKO PowerBoss Nautilus User Manual

PowerBoss
®
The Power of Clean

Hopper Vacuum Seal

A seal is attached to the vacuum tube between the vacuum
tube and the debris hopper. (See Fig. 3)
HOPPER
VACUUM SEAL
Fig. 3: Hopper Vacuum Seal location
Check this seal for wear or damage every 100 hours of
operation.
Page 86

Cover Seals

The Cover Seals are attached to each of the solution and
recovery tank covers. (See Fig. 4)
COVER
SEALS
Fig. 4: Cover Seals
Check these seals for wear or damage every 100 hours of
operation.
Nautilus Rider Scrubber/Sweeper #988749UM Rev. K 04/21
© 2014-2015 Minuteman International, Inc.