Side Scrub Brush (Option); Replacing The Side Scrub Brush - HAKO PowerBoss Nautilus User Manual

SIDE SCRUB BRUSH (OPTION)

Replacing the Side Scrub Brush

1. Raise the side scrub brush.
2. Turn off the machine.
3. Set the parking brake.
For Safety: Before leaving machine, turn off the machine,
set the parking brake, and remove the key.
4. Rotate the brush until the brush release tabs are
accessible through the opening in the brush guard.
5. Press the release tabs together. The brush will fall off of
the brush drive hub.
6. Lift a new brush onto the brush drive hub to lock it into
place.
7. Check to be sure that the brush is securely retained.
Note: Check the side brush daily for wear. The side scrub
brush should be replaced when it is no longer cleaning
eff ectively, or the bristle length has worn to 2.5 inches (5,08
cm) from the block.
Nautilus Rider Scrubber/Sweeper #988749UM Rev. K 04/21
© 2014-2015 Minuteman International, Inc.
Fig. 1: Replacing the Side Scrub Brush
PowerBoss
®
The Power of Clean
Page 77