2.1 Settings
2.1.1 Control panel
In order for the display of the control panel to work, a micro-SD card must be inserted on the
PCB of the control panel containing a special image file. This is required to make the control
panel work. A micro-SD card with the required image file can be stored on using the Hako
diagnostics. See chapter 2.3.6.
If the micro SD card is missing, a "blue screen" (Fig. 2.1) is displayed. If a empty SD-Card or
defective SD-Card or a formatted SD-Card is inserted, a "Black screen" either with or without
a message is displayed (Fig. 2.3).
If the "Loading Screen" is displayed, the control panel is raised but the connection to the
machine controller is missing (Fig. 2.2).
The micro SD card cannot be read by the usual computer operating systems (Windows,
Linux, IOS, Android).
Figure 2.2
Figure 2.3
Figure 2.1
Slide 12