Anchor Watch - Icom IC-M510BB Instruction Manual

9
OTHER FUNCTIONS

■ Anchor Watch

Anchor Watch is the function to sound an alarm when your vessel is at anchor and has
drifted.
D Starting Anchor Watch
z Push
• The "ANCHOR INFORMATION" screen is
displayed.
TIP: You can also start the Anchor Watch
mode by selecting the "Start Anchor Watch"
item on the Menu screen.
[MENU] > Anchor Watch > Start Anchor Watch
L When your vessel exceeds the range of the
anchor watch, "Exceeded anchor radius!" is
displayed.
D Stopping Anchor Watch
1. Push
• "Deactivate anchor watch. Are you sure?" is
displayed.
2. Push .
TIP: You can also stop the Anchor Watch mode
by selecting the "Stop MOB" item on the Menu
screen.
[MENU] > Anchor Watch > Stop Anchor Watch
D Anchor Watch Settings
[MENU] > Settings > Anchor Watch
z Audible Alarm
Select whether or not to sound an alarm when the vessel is drifting off its anchor
position.
ON: The alarm sounds.
OFF: The alarm does not sound.
z Range
Set the alarm function range from 0.01 to 6.00 NM (0.01 NM steps).
65
to start the Anchor Watch mode.
to stop the Anchor Watch mode.