Electrical Connection - Assa Abloy SW200 Installation And Service Manual

12 Electrical connection

12 Electrical connection
Note! During any work with the electrical connections the mains must be disconnected.
• Place the electric switch easily accessible from the operator. If an plug contact is used in the
installation the wall socket shall be placed easily accessible from the operator.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
See Auto-learn automatically sets back and latch check (recommended) on page 63.
If R/S < 192mm, the connection box should be rebuilt.
Mains connection
a Switch off the mains.
b Connect the plug contact to the wall socket or connect to the mains switch.
Alt. 1 (Standard)
Alt. 2 (Optional)
10AT
50
1
0
0
1
Issue 2021-02-24 1009728-en-9.0