Non-Detectored Electrical - Assa Abloy Rixson Smok-Chek VI Installation And Instruction Manual

NON-DETECTORED
ELECTRICAL CONNECTIONS
• Power input to unit must be of the same voltage as that listed on the label.
• All wiring connections use standard wiring practice conforming to local wiring codes.
• Maximum wire size is 18AWG.
• Make input power connections to the terminal block or power supply using illustrations below.
Surface mount power input:
Remove appropriate
shaded area from
cover for surface
wired installations
only. Repaint cut
edges as necessary
to prevent corrosion.
Stand-Alone wiring instructions below. (To incorporate other devices, see
included wiring instruction manual: 80-9342-0904-000)
120V AC INPUT
Make power connections as shown below.
Make Connections
24V DC INPUT
Make power connections as shown below.
Make Connections
Copyright © 2010, 2014 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
7/8"
7/8"
Terminal Block
Here
Terminal Block
Here
Clearance
For Strain Relief
2-5/8"
On/Off
Switch
On/Off
Switch
12
RIXSON
ASSA ABLOY
!
Caution:
Determine proper
input power; 24V or 120V.
Cover surface
facing ceiling.
Ground
Neutral
Live
24V(+)
24V(-)
80-9372-0100-015 (02-14)
®