11
Electrical connection
Note: The installation shall be made according to local codes.
During any work with the electrical connections the mains must be disconnected.
Place the electric switch easily accessible from the operator. If a plug contact is used in the in-
stallation the wall socket shall be placed easily accessible from the operator.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
11.1
Mains connection
Alt. 1
a Disconnect the mains power.
b Connect the adaptor to the CU. (Use the power adaptor holder or the extension power cord if needed.)
c Connect mains power to the adaptor.
1020004-en-US-2.0
Issue 2020-10-27
11 Electrical connection
35