Electrical Connections - Assa Abloy Norton SafeZone 7110SZ Installation And Instruction Manual

ELECTRICAL CONNECTIONS

• Power input to unit must be of the same voltage as that listed on the label.
• All wiring connections use standard wiring practice conforming to local wiring codes.
• Maximum wire size is 18AWG.
• Make input power connections to the terminal block or power supply using illustrations.
Surface mount power input:
Remove appropriate
shaded area from
cover for surface
wired installations
only. Repaint cut
edges as necessary
to prevent corrosion.
120V AC INPUT
Make power connections as shown below.
24V DC INPUT
Make power connections as shown below.
Copyright © 2010, 2014 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
7/8"
7/8"
Terminal Block
Make Connections
Here
Terminal Block
Make Connections
Here
Clearance
For Strain Relief
2-5/8"
On/Off
Switch
On/Off
Switch
11
ASSA ABLOY
!
Caution:
Determine proper
input power; 24V or 120V.
Cover surface
facing ceiling.
Ground
Neutral
Live
24V(+)
24V(-)
80-9371-0081-020 (01-14)