Table of Contents
Advertisement
11 Mechanical installation
a Locate the door in closed position.
b Fix the main arm with guide shoe (1) loose onto the operator shaft so that the guide shoe is
just in contact with the door.
c During the opening and closing movement of the door, the guide shoe (1) will move a certain
distance on the door. Mark the end positions for this distance.
Note! The end positions do not always occur when the door is fully closed and fully open.
d Position the slide track (3) symmetrically over the marks on the door, with the centre of the
fixing holes, W + 54 mm (see table
the door for the fixing holes. Drill and thread or use rivnuts.
e Attach the slide track (3) to the door with the guide shoe (1) fitted into the track. Use appropriate
screws.
1
Guide shoe
2
Main arm
3
Slide track
48
on page
41), from the lower edge of the operator. Mark on
1
2
Issue 2021-02-24
3
1009728-en-9.0
Advertisement
Table of Contents
