Instructions for safe operation Failure to observe the information in this manual may result in personal injury or damage to equipment. To reduce the risk of injury to persons - use this oper- ator with single or double pedestrian swinging or folding doors only.
Congratulations on your new automatic door! ASSA ABLOY Entrance Systems AB has developed automatic doors for more than 50 years. State-of- the-art technology and carefully tested materials and components provide you with a superior product. As with all other technical products, your automatic door requires periodic maintenance and service.
Warranty ASSA ABLOY Entrance Systems warrants its products to be free from defects in material and work- manship under intended use and service for a warranty time of 12 months, beginning at time of delivery. This warranty extends only to the original buyer of the equipment.
Intended use The ASSA ABLOY SW200 is an automatic swing door operator developed to make life easier for everyone who can benefit from automatic doors. The ASSA ABLOY SW200 is a low-energy operator using a DC motor and a gear-reduction system to drive an arm system, which opens the door. It is to be installed indoors where it is suitable for almost all types of external and internal swing doors.
The ASSA ABLOY SW200 can be set in three or four different modes, depending on optional pro- gramme selector type, see table below. In fully manual use (or in case of a power failure) the ASSA ABLOY SW200 acts as a normal door closer.
Let the door close after an impulse ensuring nothing prevents the door from closing and locking (if regulations require it). Fire doors Take appropriate measures. Contact your ASSA ABLOY Entrance Systems representative. For contact information, see last page. Issue 2019-06-12 1009729-en-6.0...
Page 9
CLEANING The best way to remove dust and dirt from the ASSA ABLOY SW200 is to use water and a soft cloth or a sponge. A gentle detergent may be used. To maintain the quality of the surface treatment, the surfaces should be cleaned once/four months period.
Page 10
No entry, identifying one-way traffic: Mandatory in GB and US, if applicable, not included in the product. Automatic door Keep clear SITAC label: Mandatory in SE Contact your ASSA ABLOY Entrance Systems service representative. For contact information, see last page. Issue 2019-06-12 1009729-en-6.0...
Door stop (not illustrated) Safety accessories Even though the ASSA ABLOY SW200 is installed to comply with all applicable safety regulations, it is possible to enhance safety/comfort with the following add-ons (please contact your local ASSA ABLOY Entrance Systems company for detailed description).
Remember to keep “Service Log Book” and “Site Acceptance Test and Risk Assessment” documents (PRA-0007) available. These are used together. The table below shows the recommended interval in months, when to replace parts during preventive maintenance. Talk to your ASSA ABLOY Entrance Systems representative to learn more about our service offering. Part...
IEC 60335-2-103:2002 ed. 1/2011 ed. 2.1 EN 1634-1:2008 EC type examination or certificate issued by a notified or competent body (for full address, please contact ASSA ABLOY Entrance Systems AB) concerning the equipment: SC0072-14 UL File E47833 UL File R9469 The manufacturing process ensures the compliance of the equipment with the technical file.
Page 14
Building on the long-term success of the Besam, Crawford, Albany and Megadoor brands, we offer our solutions under the ASSA ABLOY brand. Our products and services are dedicated to satisfying end-user needs for safe, secure, convenient and sustainable operations.
Need help?
Do you have a question about the SW200 and is the answer not in the manual?
Questions and answers