Installing The Thermostat And Communication Cable - Wine Guardian Sentinel Series Installation, Operation And Maintenance Manual

Installing the Thermostat and Communication Cable

Wired (recommended)
communication cable. 50' (15.25 meters) of control cable is included with each controller with
longer lengths available as an option.
Whenever possible we strongly suggest wiring the Remote Interface Controller directly to the
Wine Guardian unit to avoid periodic battery changes and uninterrupted service.
Wirelessly -
connects wirelessly to the Wine Guardian unit by Radio Frequency connectivity
through one of twelve selectable channels.
Wireless installation may result in limited communication range and connectivity issues
depending upon building construction and distance between Wine Guardian unit and Remote
The Wine Guardian Wireless-to-base Remote Interface Controller is a configurable device that
can be fine-tuned through a series of individual settings. The controller incorporates eight (8)
key temperature, humidity and system alarm points. Remote alarm indication is possible
through terminal point connections at our main control board.
In most applications, the remote interface controller will be mounted within the wine cellar. The
remote interface controller can also be mounted directly outside of the wine cellar or in any
other room of the home or building. When mounted outside of the wine cellar, a remote sensor
kit or a second wireless remote interface must be purchased and installed within the wine cellar.
Regardless of wired or wireless each, Wine guardian System can have a maximum of two (2)
Remote Interface Controllers and three (3) Remote Sensors.
33
The Wine Guardian Wireless-to-base Remote Interface
Controller is a combination temperature and humidity controller
with single stage cooling, heating, and humidity control. Its
capacitive touch screen incorporates an on/off switch,
adjustment arrows and settings buttons for ease of use and
programming. The controller can be installed one of two ways:
– wired directly to the Wine Guardian unit through an RJ-9
IMPORTANT
IMPORTANT
Interface Controller and/or Remote Sensors.
IMPORTANT