Troubleshooting - Wine Guardian Sentinel Series Installation, Operation And Maintenance Manual

Troubleshooting

BEFORE PROCEEDING, READ AND UNDERSTAND THE SAFETY INFORMATION CONTAINED IN
THE SAFETY SECTION OF THE WINE GUARDIAN MANUAL.
This section is intended as a diagnostic aid only. For detailed repair or parts replacement
procedures, contact a qualified service company. Check the following table for some
Possible Cause
Loose, improper, or defective thermostat or
humidistat cable
Incorrect thermostat or humidistat (optional)
settings
Changed settings on the thermostat
Power Switch Light is Off
Possible Cause:
•
Switch not on
•
No power to outlet
•
Unit not plugged in
Power switch light is on, and the thermostat light is off
Possible Cause
•
No power to the thermostat
Power switch light is on, and the thermostat light is on
Possible Cause
•
Thermostat is not set up properly
65
IMPORTANT
solutions before calling a service technician.
Replacement components must be properly rated.
Typical Start-up Problems
Unit Does Not Start-up
WARNING
Solution
Check power, and thermostat or humidistat
cable
Check the thermostat and optional
humidistat set up for the application
A common problem is not waiting long
enough for the internal timers to complete
their timed delay
Solution:
•
Turn on switch
•
Check circuit breaker and wiring
•
Plug in the unit
Solution:
•
Check wiring for loose, broken, or
frayed connections
•
Check wiring for proper splicing
•
Remote interface controller may be
faulty
Solution
•
Check thermostat set-up in the manual