✓ Check that all the fan blades move freely.
✓ Check for loose foreign objects in any of the air paths.
✓ Connect the round flexible ducts to the Wine Guardian using the duct collars that are
provided with the duct accessory kit.
✓ Pull the outer plastic wrapping and insulation away from the end of the duct to
expose the reinforced inside duct liner.
✓ Use tie straps of clamp around the
Do not clamp around the outside insulation. It compresses and loosens over time.
✓ Secure the duct collar to the unit using the screws provided. Be careful not to damage or
bend the gasket.
Using Ductwork
Cold Air to/from Wine Cellar
✓ Connect the supply air ductwork from the cellar to the supply air duct collar at the
Wine Guardian unit.
✓ Connect the return air ductwork from the cellar to the return air duct collar at the
Wine Guardian unit.
Warm Air to/from Condenser
✓ Connect ductwork on the condenser to direct heat and the air noise away from
occupants.
✓ Connect ductwork to another space within the basement or to the outdoors if the heat
being
exhausted is undesirable.
54
inside liner
to fasten the duct collar.