Installation; Pre-Installation Test - Wine Guardian Sentinel Series Installation, Operation And Maintenance Manual

•
Do not block any supply or return air register or duct. Install in accordance with
the instructions in the Wine Guardian Manual. Do not defeat the safety purpose
of the polarized or grounding type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
•
Protect
plugs, convenience receptacles, and the point where it exits the unit.
•
Only use attachments/accessories specified by the manufacturer.
•
Always
sources only or 230 VAC, 1 phase 50Hz power sources only
•
Always
and built-up static charges.
•
Refer all
unit has been damaged in any way such as:
✓ The power supply cord or plug is damaged.
✓ Liquid has been spilled or objects have fallen into the unit.
✓ The unit has been exposed to rain or moisture.
✓ The unit does not operate normally.
✓ The unit has been dropped.

Installation

SHARP EDGES ARE PRESENT INSIDE THE WINE GUARDIAN SYSTEM

Pre-installation Test

Test the system before installing it to check for non-visible shipping damage.
To test the system:
✓ Set the system on the floor or a sturdy level surface.
✓ Plug in the system.
✓ Press the on/off switch and check that the control illuminates. This indicates the
system has power.
25
the power cord from being walked on or pinched, particularly at the outlet
operate this equipment from a 120 VAC, 1 phase, and 60Hz power
ground the outlet to provide adequate protection against voltage surges
servicing to qualified service personnel. Servicing is required when the
RISK OF SERIOUS INJURY
WARNING
SHARP EDGES