Main Power Switch - Wine Guardian Sentinel Series Installation, Operation And Maintenance Manual

Main Power Switch

The main power switch is located on the side of the Wine Guardian unit. (See Overview
Illustration on page 12) It shuts off the power to the unit.
Energy Type
Hazard .................................. Electrocution, electrical burns and shock
Magnitude ............................. 120 VAC and 230 VAC, 1 phase, 60 cycles
............................................. 230 volts AC 1 phase, 50 cycles
Control Method ..................... Disconnect power cord and On/Off switch
•
Never reach into a unit while the fan is running.
•
Never open an access door to a fan while the fan is running.
•
Disconnect
than
one power source to disconnect.
•
Avoid risk of fire or electric shock.
•
Check weights to be sure that the rigging equipment can support and move the Wine
Guardian unit safely. Note any specific rigging and installation instructions located in
the Installation section of the Wine Guardian Manual.
•
All supports for the unit
and any additional live or dead loads encountered.
•
All supports for the unit
ordinances.
•
Do not remove access panels until fan impellers have completely stopped.
Pressure developed by moving impellers can cause excessive force against the
access panels.
•
Fan impellers continue to turn (free wheel) after the power is shut off.
•
Clean only with a dry cloth.
•
Never pressurize equipment above specified test pressure. See Wine Guardian
Specification Sheet
•
Do not use the Wine Guardian near water.
24
Electrical
the power cord switch before working on the unit. The unit may have more
DANGER
WARNING
be capable of safely supporting the equipment's weight
must
must be designed to meet applicable local codes and
Do not expose the unit to
CAUTION
rain or moisture.