Required Materials And Equipment Not Supplied - Thermo Scientific Ion GeneStudio S5 User Manual

1
Chapter 1 Product information

Required materials and equipment not supplied

Required materials and equipment not supplied
Ion Chip ™ Minifuge (120 V or 230 V; required for use only with the Ion OneTouch
System.)
Ion S5 ™ /Ion Proton
™
Ion OneTouch 2 System.)
Optional ) Non-interruptible Power Supply (UPS)
(
Thermal cycler with a heated lid
[3]
Microcentrifuge
1.5-mL or 1.7-mL microcentrifuge tubes
0.2-mL MAXYMum Recovery
polystyrene tubes)
Pipettes (P2, P10, P20, P200, P1000) and appropriate low-retention filtered tips
Isopropanol (100%)
Nuclease-free water molecular biology grade
Standard laboratory vacuum line or vacuum pump
Liquid trap
[4]
Tygon ™ tubing
Vortex mixer
[1]
IMPORTANT! Thermo Fisher Scientific has verified the procedures in this user guide using these specific materials. Substitution may adversely
affect system performance.
[2]
For laboratories that experience frequent power outages or line voltage fluctuations, we recommend that you use an non-interruptible power
supply that is compatible with 2500 W output or higher.
[3]
Must fit standard 1.5- and 0.2-mL microcentrifuge tubes and generate 15,500 ×
[4]
As needed to connect laboratory vacuum to liquid trap and liquid trap to P200 pipette tip.
8
Unless otherwise indicated, all materials are available through thermofisher.com.
MLS: Fisher Scientific (fisherscientific.com) or other major laboratory supplier.
[1]
Item
™ Rotor and Buckets Kit (required for use only with the
™ Thin Wall PCR Tubes, Flat Cap (do not use
[2]
g .
Ion GeneStudio S5 Instrument User Guide
Source
™ 2 4479672 (120V)
4479673 (230V)
4482578
MLS
MLS
MLS
MLS
Axygen, PCR-02-L-C
MLS
MLS
MLS
MLS
MLS
MLS
MLS
or