Thermo Scientific Ion GeneStudio S5 User Manual page 49

Ion GeneStudio S5 Instrument User Guide
2. Press the Ion S5 /Ion Proton
™
1
Insert motor shaft here
1
3. Tighten the set screw (arrow) with a 1.5-mm hex wrench.
Note: A newer version of the rotor lacks a set screw. In this case, simply press
the rotor firmly onto the motor shaft to install.
Appendix C Supplemental procedures
Set up and test the Ion Chip
Rotor down onto the motor shaft to install.
™
C
Minifuge
™
49