Table of Contents
Advertisement
Process
CHAPTER 3
3.1
Required Materials
An OQ/PQ kit (P/N 163936) is available for performing the OQ/PQ on the UtliMate system,
an OQ/PQ kit (P/N 163936) is available. In addition, parts from the standard instruments
accessory kits are required. TABLE 3-1 list all accessories and standards, which are
provided with the OQ/PQ kit:
TABLE 3-1
Parts included in the OQ/PQ Kit
Item Description
UltiMate System - OQ/PQ Operating
Instructions
CD ROM 'IQOQPQ on UltiMate™ (Plus)
Systems'
Set of 9 samples (flame sealed amber
ampoule)
Fused silica tubing I.D. 15 µm ± 3 µm/O.D.
375 µm ± 10 µm, 3,2 meters
Fused silica tubing I.D. 30 µm ± 3 µm/O.D.
375 µm ± 10 µm, 2,5 meters
Tubing set consisting of 130 µm I.D. x
50 cm PEEK tubing
Microtight Union, includes 2 fittings and 1
gauge plug
PEEK sleeves, precision cut and polished for
connections with Microtight Union (380 µm
O.D.), 10 pieces
PEEK sleeves, precision cut and polished for
connections with Microtight Union (280 µm
O.D.), 10 pieces
1/16" Valco Ferrule and Nut, stainless steel,
10 pc. (for 10-port valve)
PEEK sleeves, precision cut and polished for
connections with fused silica tubing
(360 µm O.D.), 5 each
PEEK 1/16" Universal Fitting for Switchos,
INERT, 10 pc., long hex nut and ferrule with
groove
Syringe adapter
Phillips-head screw M3 X 4 mm
Toothed Lock Washer 3,2 mm x 6 mm
OQ/PQ Operating Instructions
Part Number
163960
163935
163932
163933
163934
160180
161497
161405
161498
161103
160493
161007
160465
163964
163275
M1393R0
Note
Do NOT Freeze!
Restriction capillary, NAN
configurations only.
Restriction capillary, CAP
configurations only.
Used to connect the
restriction capillary.
Used to connect the
restriction capillary.
Used to connect the
restriction capillary.
Used with stainless steel
systems only.
Used with stainless steel
systems only.
Used with INERT systems
only.
Flow rate (droplet) test.
Used to install the
temperature probe.
Used to install the
temperature probe.
Page 13 of 60
Advertisement
Table of Contents
