5.1 O ve rvie w
This chapter shows how to set up the Switch for an example network.
The following lists the configuration steps for the initial setup:
•
Create a VLAN
•
Set Port VID
•
Configure Switch Management IP Address
5.1.1 C re a te a VL AN
VLANs confine broadcast frames to the VLAN group in which the ports belongs. You can do this with
port-based VLAN or tagged static VLAN with fixed port members.
In this example, you want to configure port 1 as a member of VLAN 2.
Initial Setup Network Example: VLAN
Fig ure 50
1
Click
Adva nc e d Applic a tio n
VL AN Se tup
Chapter 5 Initial Setup Example
Initia l Se tup Exa m ple
>
VL AN
link.
GS1350 Series User's Guide
C
>
in the navigation panel and click the
VL AN C o nfig ura tio n
69
HA PTER
5
Sta tic