Change Your Password; Save Your Configuration - ZyXEL Communications GS1350 Series User Manual

Table 19 Navigation Panel Links (Surveillance Mode) (continued)
L INK
Maintenance
Backup
Configuration
Firmware
Upgrade
Reboot System
Restore
Configuration
Save
Configuration
Tech-Support
4.5.1 C ha ng e Yo ur Pa sswo rd
After you log in for the first time, it is recommended you change the default administrator password.
Click
Ma na g e m e nt
Change Administrator Login Password
Fig ure 48
4.6 Sa ve Yo ur C o nfig ura tio n
When you are done modifying the settings in a screen, click
run-time memory. Settings in the run-time memory are lost when the Switch's power is turned off.
Click the
Sa ve
non-volatile memory. Non-volatile memory refers to the Switch's storage that remains even if the
Switch's power is turned off.
Chapter 4 Web Configurator
DESC RIPT IO N
This link takes you to a screen where you can save your Switch's configurations (settings) for
later use.
This link takes you to a screen to upload firmware to your Switch.
This link takes you to a screen to reboot the Switch without turning the power off.
This link takes you to a screen where you can upload a stored device configuration file.
This link takes you to a screen where you can save the current configuration (settings) to a
specific configuration file on the Switch.
This link takes you to a screen where you can download related log reports for issue analysis.
Log reports include CPU history and utilization, crash and memory.
> >
Ac c e ss C o ntro l
link in the upper right hand corner of the Web Configurator to save your configuration to
GS1350 Series User's Guide
to display the next screen.
L o g ins
Apply
66
to save your changes back to the