Igmp Snooping - ZyXEL Communications GS1350 Series User Manual

Table 75 Advanced Application > Multicast > IPv4 Multicast (continued)
L ABEL
Port
Multicast Group
21.3.1 IG MP Sno o ping
Click the
IG MP Sno o ping
the screen as shown. See
Fig ure 129
The following table describes the labels in this screen.
Table 76 Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping
L ABEL

IGMP Snooping

Active
Querier
Chapter 21 Multicast
DESC RIPT IO N
This field displays the port number that belongs to the multicast group.
This field displays IP multicast group addresses.
link in the
Adva nc e d Applic a tio n
Section 21.1 on page 170
Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping
DESC RIPT IO N
Use these settings to configure IGMP snooping.
Select to enable IGMP Snooping to forward group multicast traffic only to ports that
Ac tive
are members of that group.
Select this option to allow the Switch to send IGMP General Query messages to the VLANs with
the multicast hosts attached.
GS1350 Series User's Guide
>
Multic a st
for more information on multicasting.
172
> screen to display
IPv4 Multic a st