Vendor Id Based Vlan - ZyXEL Communications GS1350 Series User Manual

The following table describes the fields in the above screen.
Table 53 Advanced Application > VLAN > VLAN Configuration > MAC Based VLAN Setup
L ABEL
Name
MAC Address
VID
Priority
Add
Cancel
Index
Name
MAC Address
VID
Priority
Delete
Cancel
9.8 Ve ndo r ID Ba se d VL AN
The Vendor ID based VLAN feature assigns incoming untagged packets to a VLAN and classifies the
traffic based on the source MAC address of the packet. When untagged packets arrive at the switch,
the source MAC address of the packet is looked up in a Vendor ID to VLAN mapping table. If an entry is
found, the corresponding VLAN ID is assigned to the packet. The assigned VLAN ID is verified against the
VLAN table. If the VLAN is valid, ingress processing on the packet continues; otherwise, the packet is
dropped.
This feature allows users to change ports without having to reconfigure the VLAN. You can assign a
802.1p priority to the vendor ID based VLAN and define a vendor ID to VLAN mapping table by entering
a specified source MAC address and mask in the vendor ID based VLAN setup screen. You can also
delete a vendor ID based VLAN entry in the same screen.
For every vendor ID based VLAN rule you set, you can specify a weight number to define the rule's
priority level. As rules are processed one after the other, stating a priority order will let you choose which
rule has to be applied first and which second.
Click the
Ve ndo r ID Ba se d VL AN Se tup
Chapter 9 VLAN
DESC RIPT IO N
Type a name up to 32 alpha numeric characters for the MAC-based VLAN entry.
Type a MAC address that is bind to the MAC-based VLAN entry. This is the source MAC
address of the data packet that is looked up when untagged packets arrive at the Switch.
Type an ID (from 1 to 4094) for the VLAN that is associated with the MAC-based VLAN entry.
Type a priority (0 – 7) that the Switch assigns to frames belonging to this VLAN. The higher the
numeric value you assign, the higher the priority for this MAC-based VLAN entry.
Click to save the new MAC-based VLAN entry.
Add
Click to clear the fields in the MAC-based VLAN entry.
C a nc e l
This field displays the index number of the MAC-based VLAN entry.
This field displays the name of the MAC-based VLAN entry.
This field displays the source MAC address that is bind to the MAC-based VLAN entry.
This field displays the VLAN ID of the MAC-based VLAN entry.
This field displays the priority level which is assigned to frames belonging to this MAC-based
VLAN.
Select an entry's check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Click to remove the selected entry from the summary table.
De le te
Click to clear the check boxes.
C a nc e l
link in the
GS1350 Series User's Guide
131
screen to see the following screen.
VL AN C o nfig ura tio n