Basic - ZyXEL Communications GS1350 Series User Manual

• to determine a port's IEEE 802.1p priority level for QoS.
Q o S –
4.4.1 Ba sic
In , you can set up IP/DNS, set up your password, SNMP community, link aggregation, and view
Ba sic
finished results.
In order to set up your IP/DNS, please do the following. Click
screen.
Wizard > Basic > Step 1 IP
Fig ure 38
Each field is described in the following table.
Table 7 Wizard > Basic > Step 1 IP
L ABEL
Host Name
IP Interface
VID
IP Address
IP Subnet Mask
Default Gateway
Chapter 4 Web Configurator
DESC RIPT IO N
This field displays a host name.
Select if the Switch is connected to a router with the DHCP server enabled. You
DHC P C lie nt
then need to check the router for the IP address assigned to the Switch in order to access
the Switch's Web Configurator again.
Select when the Switch is NOT connected to a router or you want to assign
Sta tic IP Addre ss
it a fixed IP address.
This field displays the VLAN ID.
The Switch needs an IP address for it to be managed over the network.
The subnet mask specifies the network number portion of an IP address.
Type the IP address of the default outgoing gateway in dotted decimal notation, for
example 192.168.1.254.
GS1350 Series User's Guide
52
> >
Wiza rd Ba sic Ste p 1 IP
to access this