Firmware Upgrade - ZyXEL Communications GS1350 Series User Manual

2
Click again and then wait for the Switch to restart. This takes up to 2 minutes. This does not affect the
O K
Switch's configuration.
Click
C o nfig 1
Click
C o nfig 2
Click
Fa c to ry De fa ult
settings on the Switch.
Click
C usto m De fa ult
This will save the custom default configuration settings to both
33.3 Firm wa re Upg ra de
Use the following screen to upgrade your Switch to the latest firmware. The Switch supports dual
firmware images,
firmware is uploaded using the Web Configurator and to specify which image is loaded when the
Switch starts up.
Make sure you have downloaded (and unzipped) the correct model firmware and version to your
computer before uploading to the device.
Be sure to uplo a d the c o rre c t m o de l firm wa re a s uplo a ding the wro ng
m o de l firm wa re m a y da m a g e yo ur de vic e .
Click
Ma na g e m e nt
Fig ure 193
Chapter 33 Maintenance
and follow steps 1 to 2 to reboot and load configuration one on the Switch.
and follow steps 1 to 2 to reboot and load configuration two on the Switch.
and follow steps 1 to 2 to reboot and load Zyxel factory default configuration
and follow steps 1 to 2 to reboot and load a customized default file on the Switch.
and
Firm wa re 1 Firm wa re 2
> >
Ma inte na nc e
Management > Maintenance > Firmware Upgrade
GS1350 Series User's Guide
. Use this screen to specify which image is updated when
to view the screen as shown next.
Firm wa re Upg ra de
260
and
C o nfig ura tio n 1 C o nfig ura tio n 2
.