Igmp Snooping Vlan - ZyXEL Communications GS1350 Series User Manual

Table 76 Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping (continued)
L ABEL
IGMP Querier
Mode
Apply
Cancel
21.3.2 IG MP Sno o ping VL AN
Click
Adva nc e d Applic a tio n
link and then the
Sno o ping
and VLANs on page 171
Fig ure 130
DESC RIPT IO N
The Switch treats an IGMP query port as being connected to an IGMP multicast router (or
server). The Switch forwards IGMP join or leave packets to an IGMP query port.
Select to have the Switch use the port as an IGMP query port if the port receives IGMP
Auto
query packets.
Select to have the Switch always use the port as an IGMP query port. Select this when
Fixe d
you connect an IGMP multicast server to the port.
Select to stop the Switch from using the port as an IGMP query port. The Switch will not
Edg e
keep any record of an IGMP router being connected to this port. The Switch does not forward
IGMP join or leave packets to this port.
Click to save your changes to the Switch's run-time memory. The Switch loses these
Apply
changes if it is turned off or loses power, so use the
save your changes to the non-volatile memory when you are done configuring.
Click to begin configuring this screen afresh.
C a nc e l
>
Multic a st
IG MP Sno o ping VL AN
for more information on IGMP Snooping VLAN.
Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping > IGMP Snooping VLAN
GS1350 Series User's Guide
> in the navigation panel. Click the
IPv4 Multic a st
link to display the screen as shown. See
174
link on the top navigation panel to
Sa ve
IGMP Snooping
IG MP