Cluster Management Status - ZyXEL Communications GS1350 Series User Manual

• Use the
C luste ring Ma na g e m e nt C o nfig ura tio n
clustering management.
38.2 C luste r Ma na g e m e nt Sta tus
Use this screen to view the role of the Switch within the cluster and to access a cluster member Switch's
Web Configurator.
Click
Ma na g e m e nt
Note: A cluster can only have one manager.
Fig ure 223
The following table describes the labels in this screen.
Table 149 Management > Cluster Management Status
L ABEL
Status
Manager
The Number of
Member
Index
MacAddr
Name
Model
Status
Chapter 38 Cluster Management
>
C luste r Ma na g e m e nt
Management > Cluster Management Status
DESC RIPT IO N
This field displays the role of this Switch within the cluster.
Ma na g e r
(you see this if you access this screen in the cluster member Switch directly and not via
Me m b e r
the cluster manager)
(neither a manager nor a member of a cluster)
No ne
This field displays the cluster manager Switch's hardware MAC address.
This field displays the number of switches that make up this cluster. The following fields describe
the cluster member switches.
You can manage cluster member switches via the cluster manager Switch. Each number in the
column is a hyperlink leading to the cluster member Switch's Web Configurator (see
Inde x
225 on page 303).
This is the cluster member Switch's hardware MAC address.
This is the cluster member Switch's
This field displays the model name.
This field displays:
(the cluster member Switch is accessible)
O nline
(for example the cluster member Switch password was changed or the Switch was set as
Erro r
the manager and so left the member list, and so on)
(the Switch is disconnected –
O ffline
between cluster member and manager goes down)
GS1350 Series User's Guide
screen (Section 38.1 on page
in the navigation panel to display the following screen.
.
Syste m Na m e
shows approximately 1.5 minutes after the link
O ffline
300
299) to configure
Figure