Error-Disable Detect Configuration - ZyXEL Communications GS1350 Series User Manual

The following table describes the labels in this screen.
Table 90 Advanced Application > Errdisable > CPU protection
L ABEL
Reason
Port
*
Rate Limit (pkt/s) Enter a number from 0 to 256 to specify how many control packets this port can receive or
Apply
Cancel
25.5 Erro r- Disa b le De te c t C o nfig ura tio n
Use this screen to have the Switch detect whether the control packets exceed the rate limit configured
for a port and configure the action to take once the limit is exceeded. Click the
Errdisa b le De te c t
Advanced Application > Errdisable > Errdisable Detect
Fig ure 149
The following table describes the labels in this screen.
Table 91 Advanced Application > Errdisable > Errdisable Detect
L ABEL
Cause
*
Active
Chapter 25 Error Disable
DESC RIPT IO N
Select the type of control packet you want to configure here.
This field displays the port number.
Use this row to make the setting the same for all ports. Use this row first and then make
adjustments to each port if necessary.
Changes in this row are copied to all the ports as soon as you make them.
transmit per second.
means no rate limit.
0
You can configure the action that the Switch takes when the limit is exceeded. See
on page 203 for detailed information.
Click to save your changes to the Switch's run-time memory. The Switch loses these
Apply
changes if it is turned off or loses power, so use the
your changes to the non-volatile memory when you are done configuring.
Click to begin configuring this screen afresh.
C a nc e l
link in the
Adva nc e d Applic a tio n
DESC RIPT IO N
This field displays the types of control packet that may cause CPU overload.
Use this row to make the setting the same for all entries. Use this row first and then make
adjustments to each entry if necessary.
Changes in this row are copied to all the entries as soon as you make them.
Select this option to have the Switch detect if the configured rate limit for a specific control
packet is exceeded and take the action selected below.
GS1350 Series User's Guide
link on the top navigation panel to save
Sa ve
> screen to display the screen as shown.
Errdisa b le
203
Section 25.5
link next to
C lic k He re