Dhcp Configuration; Dhcpv4 Status; Dhcpv4 Relay - ZyXEL Communications GS1350 Series User Manual

31.2 DHC P C o nfig ura tio n
Click
IP Applic a tio n
to open screens where you can enable and configure DHCPv4 relay settings and create option
DHC Pv4
82 profiles. Click the link next to
settings.
Fig ure 176
31.3 DHC Pv4 Sta tus
Click
IP Applic a tio n
Fig ure 177
The following table describes the labels in this screen.
Table 112 IP Application > DHCP > DHCPv4 Status
L ABEL
Relay Status
Relay Mode
31.4 DHC Pv4 Re la y
Configure DHCP relay on the Switch if the DHCP clients and the DHCP server are not in the same
broadcast domain. During the initial IP address leasing, the Switch helps to relay network information
(such as the IP address and subnet mask) between a DHCP client and a DHCP server. Once the DHCP
client obtains an IP address and can connect to the network, network information renewal is done
between the DHCP client and the DHCP server without the help of the Switch.
The Switch can be configured as a global DHCP relay. This means that the Switch forwards all DHCP
requests from all domains to the same DHCP server. You can also configure the Switch to relay DHCP
information based on the VLAN membership of the DHCP clients.
> in the navigation panel to display the screen as shown. Click the link next to
DHC P
DHC Pv6
IP Application > DHCP
> >
DHC P DHC Pv4
IP Application > DHCP > DHCPv4 Status
DESC RIPT IO N
This section displays configuration settings related to the Switch's DHCP relay mode.
This field displays:
– if the Switch is not configured as a DHCP relay agent.
No ne
– if the Switch is configured as a DHCP relay agent only.
G lo b a l
– followed by a VLAN ID or multiple VLAN IDs if it is configured as a relay agent for specific
VL A N
VLANs.
GS1350 Series User's Guide
Chapter 31 DHCP
to open a screen where you can configure DHCPv6 relay
in the navigation panel. The
242
screen displays.
DHC P Sta tus