Background Telemetry Channel; Visualdsp++ Interface; Boot Load - Analog Devices ADSP-21364 EZ-KIT Lite Manual

Background Telemetry Channel

Some USB debug agents support the Background Telemetry Channel
(BTC), which facilitates data exchange between VisualDSP++ and the
processor without interrupting processor execution.
This revision of the ADSP-21364 EZ-KIT Lite does not support the
Background Telemetry.

VisualDSP++ Interface

This section provides information about the following parts of the Visu-
alDSP++ graphical user interface:
• "Boot Load" on page 1-11
• "Target Options" on page 1-12
• "Core Hang Conditions" on page 1-13
• "Hardware Breakpoints" on page 1-15

Boot Load

Choosing Boot Load from the Settings menu runs the processor and per-
forms a hard reset on the board. This command saves you from having to
shut down VisualDSP++, reset the EZ-KIT Lite board, and bring up Visu-
alDSP++ again when you want to perform a hard reset.
Use this feature when loading debug boot code from an external part or
when you want to put the device into a known state.
ADSP-21364 EZ-KIT Lite Evaluation System Manual
Using EZ-KIT Lite
1-11