Table of Contents
Advertisement
3 Part 3 - Traditional wheel end with 3-4 planets
Spindle fitted with screws
Fig. 3.5
Fig. 3.6
Fig. 3.7
5. Assembly the new o-ring in the slot of the wheel end
Fig. 3.5
6. Apply grease on the joint surface. - Fig. 3.6
7. Put the wheel end in the position. - Fig. 3.7
WARNING:
Do not damage the o-ring present in the spacer.
8. Put the brake in position. - Fig. 3.8
Fig. 3.8
Meritor Wheel end assembly
73
Advertisement
Table of Contents
