Table of Contents
Advertisement
2 Part 3 - Traditional wheel end with 3-4 planets
Spindle fitted with screws
Fig. 2.18
Fig. 2.19
Fig. 2.20
68
Meritor Wheel end assembly
10. Untighten the screws of "L" brackets (M14x2).
Discard and Scrap - Fig. 2.18
WARNING:
To avoid any problems on the thread it is advised not to use
any electric or pneumatic screwdrivers.
TIP & TRICK: to ease assembly and adjustment procedures,
mark the position of the lever on the camshaft.
TIP & TRICK: Just as before, mark the position of the clevis
on the air chamber pushrod to help yourself during the
a
ssembly and adjustment procedures. - Fig. 2.20
NOTE: For further instructions on the brake setting,
adjustment and operation – refer to service manual MM0267
Advertisement
Table of Contents
