2 Part 3 - Traditional wheel end with 3-4 planets
Spindle fitted with screws
Fig. 2.9
Fig. 2.10
Fig. 2.11
66
Meritor Wheel end assembly
1. Use a punch to remove locking indent on wheel hub nut collar.
Fig. 2.9
2. Undo the nut using a wrench. Remove the hub nut and
discard. - Fig. 2.10
3. Remove the ring gear group. - Fig. 2.11
NOTE
: If available, use a lifting tool.
WARNING:
Do not damage the thread of the wheel end spindle.
4. Remove the external wheel bearing. Fig. 2.12
WARNING:
Do not damage the thread of the wheel end spindle.
Fig. 2.12