Table of Contents
Advertisement
2 Part 2 - Traditional wheel end with 3-4 planets
Spindle fitted with interference
Fig. 2.12
Fig. 2.13
Fig. 2.14
4. Remove the external wheel bearing. Fig. 2.12
5. Remove the hub (Fig. 2.13) and check the green o-ring in the
back side. - Fig. 2.14
NOTE
: If available, use a lifting tool.
WARNING:
Do not damage the thread of the wheel end spindle
WARNING:
If the green o-ring has a mark, discard and scrap it.
O Ring
Meritor Wheel end assembly
43
Advertisement
Table of Contents
