Table of Contents
Advertisement
3 Part 2 - Traditional wheel end with 3-4 planets
Spindle fitted with interference
Dim. B
Cover
Fig. 3.16c
Final Clearance
from 1 to 2 mm
Fig. 3.17
Washers
Fig. 3.18
52
Meritor Wheel end assembly
Dimension B
Offer up the cover plate into its position against the face of the
hub casing pushing in the sun gear. Remove the cover, and
remeasure the depth of the sun gear thrust washer, as previously
record dimension B (mm) Fig. 3.16c with depth slide gear.
Final Clearance calculation
Position
Dimensions (A-B) between 1-2 mm
referred
Fig. 3.17
Dim. A
If outside these limits, remove the grooved pin and change the
number of washers under the pin. Fig. 3.18
Position
referred
Dim. B
Refit the magnetic washer over the grooved pin and retain in
position with a new star lock fastener. Fig. 3.19
Fig. 3.19
Debris Magnet in
Hub Reduction Unit
Advertisement
Table of Contents
